Tosol TA

Tosol TA

Produced by: TS U 24.6-30802090-130:2009

Agrinol Tosol cooling liquids are designed for cooling of an internal combustion engines, as well as the working fluid in the other heat exchangers operating at low and moderate temperatures.
Agrinol Tosol can be used both in copper and in aluminum radiators. It should be poured directly into the cooling system. Fluid is designed for operation without replacement and without addition of any additives during 60,000 km or for 2 year period.

 Coolant Agrinol Tosol ТА is used in south regions with environment temperature not lower than minus 20°С.

Characteristics:

Index nameTosol TA
Crystallization temperature, °С, not more than -21
Pour point, °С, not more than -23
РН level, рН units, within 7,5-11,0
Corrosive effect on metals, g /m2 *24 hours, not more than:
- Copper, cast iron, brass, steel 0,1
- Solder 0,2
- Aluminum 0,1
Rubber swelling, %, not more than 5
Alkalinity, cm3 , not less than 10
Density at 20°С, kg/m3, within 1055-1125
Foaming:
- Amount of foam, cm3 , not more than 30
- Foam stability, s., not more than 3

Application area:


Agrinol Tosol cooling liquids are designed for cooling of an internal combustion engines, as well as the working fluid in the other heat exchangers operating at low and moderate temperatures. 
Agrinol Tosol can be used both in copper and in aluminum radiators. It should be poured directly into the cooling system. Fluid is designed for operation without replacement and without addition of any additives during 60,000 km or for 2 year period.

Coolant Agrinol Tosol ТА is used in south regions with environment temperature not lower than minus 20°С.

Quality index name are only informational and may be different from GOST.